And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:48.597
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.530
And
I accept adding "cowsay" to Additional Software
5.486
And
Additional Software is correctly configured for package "cowsay"
0.651
And
I shutdown Tails and wait for the computer to power off
7.479
And
I start Tails from USB drive "__internal" with network unplugged
1:9.061
And
I enable persistence
10.093
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.918
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.439
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.085
And
I prepare the Additional Software upgrade process to fail
0.208
And
the network is plugged
0.103
And
available upgrades have been checked
0.051
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.281
And
I can open the Additional Software configuration window from the notification
2.748
And
I shutdown Tails and wait for the computer to power off
18.643
And
I start Tails from USB drive "__internal" with network unplugged
1:7.431
And
I enable persistence
7.800
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
13.415
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.366
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.060
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069