And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:56.635
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.125
And
I accept adding "cowsay" to Additional Software
5.540
And
Additional Software is correctly configured for package "cowsay"
0.757
And
I shutdown Tails and wait for the computer to power off
7.600
And
I start Tails from USB drive "__internal" with network unplugged
1:7.345
And
I enable persistence
8.214
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
14.008
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.522
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.053
And
available upgrades have been checked
0.067
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.287
And
I can open the Additional Software configuration window from the notification
2.875
And
I shutdown Tails and wait for the computer to power off
17.688
And
I start Tails from USB drive "__internal" with network unplugged
1:6.603
And
I enable persistence
8.940
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
15.367
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.418
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.061
Then
the Additional Software upgrade service has started
0.177
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090