And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:53.426
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.834
And
I accept adding "cowsay" to Additional Software
5.461
And
Additional Software is correctly configured for package "cowsay"
0.704
And
I shutdown Tails and wait for the computer to power off
7.675
And
I start Tails from USB drive "__internal" with network unplugged
1:3.660
And
I enable persistence
7.798
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
13.250
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.404
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.078
And
available upgrades have been checked
1.142
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.408
And
I can open the Additional Software configuration window from the notification
2.985
And
I shutdown Tails and wait for the computer to power off
22.757
And
I start Tails from USB drive "__internal" with network unplugged
1:3.624
And
I enable persistence
7.902
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
13.204
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.325
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.054
Then
the Additional Software upgrade service has started
0.289
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.149