And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:53.664
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.712
And
I accept adding "cowsay" to Additional Software
5.728
And
Additional Software is correctly configured for package "cowsay"
0.818
And
I shutdown Tails and wait for the computer to power off
7.592
And
I start Tails from USB drive "__internal" with network unplugged
1:4.860
And
I enable persistence
9.938
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
12.046
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.423
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.058
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.418
And
I can open the Additional Software configuration window from the notification
3.171
And
I shutdown Tails and wait for the computer to power off
12.409
And
I start Tails from USB drive "__internal" with network unplugged
1:3.934
And
I enable persistence
7.684
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
12.320
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.441
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.213
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.114