And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.689
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.072
And
I accept adding "cowsay" to Additional Software
5.337
And
Additional Software is correctly configured for package "cowsay"
0.702
And
I shutdown Tails and wait for the computer to power off
7.826
And
I start Tails from USB drive "__internal" with network unplugged
1:6.501
And
I enable persistence
8.961
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.109
And
I log in to a new session
12.909
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.431
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.061
And
available upgrades have been checked
1.153
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.686
And
I can open the Additional Software configuration window from the notification
2.932
And
I shutdown Tails and wait for the computer to power off
7.793
And
I start Tails from USB drive "__internal" with network unplugged
1:3.842
And
I enable persistence
8.128
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
11.177
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.442
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.050
Then
the Additional Software upgrade service has started
0.173
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092