And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:56.402
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.063
And
I accept adding "cowsay" to Additional Software
5.703
And
Additional Software is correctly configured for package "cowsay"
0.745
And
I shutdown Tails and wait for the computer to power off
8.984
And
I start Tails from USB drive "__internal" with network unplugged
1:5.334
And
I enable persistence
8.807
And
I configure APT to prefer an old version of cowsay
0.051
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
13.355
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.439
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.053
And
available upgrades have been checked
0.070
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.079
And
I can open the Additional Software configuration window from the notification
2.891
And
I shutdown Tails and wait for the computer to power off
18.423
And
I start Tails from USB drive "__internal" with network unplugged
1:5.967
And
I enable persistence
7.871
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
13.398
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.364
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.160
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090