And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:56.490
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.570
And
I accept adding "cowsay" to Additional Software
5.522
And
Additional Software is correctly configured for package "cowsay"
0.815
And
I shutdown Tails and wait for the computer to power off
8.639
And
I start Tails from USB drive "__internal" with network unplugged
1:6.908
And
I enable persistence
8.333
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
15.090
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.338
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.087
And
the network is plugged
0.224
And
available upgrades have been checked
2.491
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.463
And
I can open the Additional Software configuration window from the notification
2.833
And
I shutdown Tails and wait for the computer to power off
17.447
And
I start Tails from USB drive "__internal" with network unplugged
1:7.307
And
I enable persistence
8.231
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
14.833
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.348
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.089
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
0.168
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068