And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:48.846
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.041
And
I accept adding "cowsay" to Additional Software
5.499
And
Additional Software is correctly configured for package "cowsay"
0.724
And
I shutdown Tails and wait for the computer to power off
3.071
And
I start Tails from USB drive "__internal" with network unplugged
1:3.295
And
I enable persistence
8.127
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
11.046
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.748
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.055
And
available upgrades have been checked
0.042
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.674
And
I can open the Additional Software configuration window from the notification
2.736
And
I shutdown Tails and wait for the computer to power off
18.595
And
I start Tails from USB drive "__internal" with network unplugged
1:5.782
And
I enable persistence
8.146
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
21.836
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
21.653
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.063
Then
the Additional Software upgrade service has started
0.145
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.138