And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:51.542
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.195
And
I accept adding "cowsay" to Additional Software
5.486
And
Additional Software is correctly configured for package "cowsay"
0.716
And
I shutdown Tails and wait for the computer to power off
7.488
And
I start Tails from USB drive "__internal" with network unplugged
1:4.932
And
I enable persistence
7.866
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
12.583
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.450
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.052
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.314
And
I can open the Additional Software configuration window from the notification
2.699
And
I shutdown Tails and wait for the computer to power off
22.829
And
I start Tails from USB drive "__internal" with network unplugged
1:3.554
And
I enable persistence
7.973
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
12.854
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.448
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.143
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098