And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:0.777
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.471
And
I accept adding "cowsay" to Additional Software
5.756
And
Additional Software is correctly configured for package "cowsay"
0.871
And
I shutdown Tails and wait for the computer to power off
8.056
And
I start Tails from USB drive "__internal" with network unplugged
1:8.789
And
I enable persistence
9.818
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
14.261
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.403
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.084
And
available upgrades have been checked
0.071
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.701
And
I can open the Additional Software configuration window from the notification
2.727
And
I shutdown Tails and wait for the computer to power off
18.546
And
I start Tails from USB drive "__internal" with network unplugged
1:7.064
And
I enable persistence
9.705
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
14.577
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.407
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.143
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.119