And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.871
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.619
And
I accept adding "cowsay" to Additional Software
7.217
And
Additional Software is correctly configured for package "cowsay"
0.796
And
I shutdown Tails and wait for the computer to power off
7.673
And
I start Tails from USB drive "__internal" with network unplugged
1:6.943
And
I enable persistence
9.574
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
13.855
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.461
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.069
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.251
And
I can open the Additional Software configuration window from the notification
2.839
And
I shutdown Tails and wait for the computer to power off
17.783
And
I start Tails from USB drive "__internal" with network unplugged
1:7.365
And
I enable persistence
8.130
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
12.962
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
20.932
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.178
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073