And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:59.078
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.469
And
I accept adding "cowsay" to Additional Software
5.875
And
Additional Software is correctly configured for package "cowsay"
0.845
And
I shutdown Tails and wait for the computer to power off
7.646
And
I start Tails from USB drive "__internal" with network unplugged
1:5.876
And
I enable persistence
9.707
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
12.626
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.517
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.153
And
available upgrades have been checked
0.077
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.858
And
I can open the Additional Software configuration window from the notification
2.837
And
I shutdown Tails and wait for the computer to power off
17.912
And
I start Tails from USB drive "__internal" with network unplugged
1:7.149
And
I enable persistence
9.923
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
13.911
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.323
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.067
Then
the Additional Software upgrade service has started
0.146
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080