And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:58.124
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.610
And
I accept adding "cowsay" to Additional Software
7.296
And
Additional Software is correctly configured for package "cowsay"
0.859
And
I shutdown Tails and wait for the computer to power off
7.703
And
I start Tails from USB drive "__internal" with network unplugged
1:7.499
And
I enable persistence
8.551
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
12.709
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.112
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.074
And
available upgrades have been checked
0.065
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.975
And
I can open the Additional Software configuration window from the notification
2.755
And
I shutdown Tails and wait for the computer to power off
17.744
And
I start Tails from USB drive "__internal" with network unplugged
1:7.010
And
I enable persistence
8.438
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
13.060
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.806
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.070
Then
the Additional Software upgrade service has started
0.145
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073