And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:56.640
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.212
And
I accept adding "cowsay" to Additional Software
5.388
And
Additional Software is correctly configured for package "cowsay"
0.670
And
I shutdown Tails and wait for the computer to power off
7.699
And
I start Tails from USB drive "__internal" with network unplugged
1:3.873
And
I enable persistence
7.744
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
12.886
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.389
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.079
And
available upgrades have been checked
0.072
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.455
And
I can open the Additional Software configuration window from the notification
2.767
And
I shutdown Tails and wait for the computer to power off
17.111
And
I start Tails from USB drive "__internal" with network unplugged
1:4.778
And
I enable persistence
8.170
And
I configure APT to prefer an old version of cowsay
0.019
And
I log in to a new session
13.204
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.285
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.061
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072