And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:56.449
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.720
And
I accept adding "cowsay" to Additional Software
5.154
And
Additional Software is correctly configured for package "cowsay"
0.822
And
I shutdown Tails and wait for the computer to power off
7.344
And
I start Tails from USB drive "__internal" with network unplugged
1:7.138
And
I enable persistence
8.748
And
I configure APT to prefer an old version of cowsay
0.047
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
13.738
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.344
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.062
And
available upgrades have been checked
2.506
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.479
And
I can open the Additional Software configuration window from the notification
2.937
And
I shutdown Tails and wait for the computer to power off
22.243
And
I start Tails from USB drive "__internal" with network unplugged
1:7.633
And
I enable persistence
16.795
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
14.730
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.468
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
the network is plugged
0.164
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079