And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:58.424
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.603
And
I accept adding "cowsay" to Additional Software
5.673
And
Additional Software is correctly configured for package "cowsay"
1.136
And
I shutdown Tails and wait for the computer to power off
7.839
And
I start Tails from USB drive "__internal" with network unplugged
1:6.693
And
I enable persistence
11.008
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
12.832
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.416
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.064
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
10.501
And
I can open the Additional Software configuration window from the notification
2.926
And
I shutdown Tails and wait for the computer to power off
19.390
And
I start Tails from USB drive "__internal" with network unplugged
1:8.096
And
I enable persistence
8.937
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
13.185
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.890
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.168
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089