And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:54.375
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.105
And
I accept adding "cowsay" to Additional Software
5.279
And
Additional Software is correctly configured for package "cowsay"
1.111
And
I shutdown Tails and wait for the computer to power off
3.163
And
I start Tails from USB drive "__internal" with network unplugged
1:5.237
And
I enable persistence
8.107
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
12.686
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.490
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.102
And
the network is plugged
0.096
And
available upgrades have been checked
1.136
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.207
And
I can open the Additional Software configuration window from the notification
2.853
And
I shutdown Tails and wait for the computer to power off
2:3.743
And
I start Tails from USB drive "__internal" with network unplugged
1:4.492
And
I enable persistence
8.100
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
13.489
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.424
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079