And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:59.381
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.375
And
I accept adding "cowsay" to Additional Software
5.344
And
Additional Software is correctly configured for package "cowsay"
1.404
And
I shutdown Tails and wait for the computer to power off
8.252
And
I start Tails from USB drive "__internal" with network unplugged
1:7.057
And
I enable persistence
9.929
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
12.158
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.800
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.272
And
available upgrades have been checked
0.071
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.141
And
I can open the Additional Software configuration window from the notification
2.949
And
I shutdown Tails and wait for the computer to power off
18.106
And
I start Tails from USB drive "__internal" with network unplugged
1:6.634
And
I enable persistence
8.452
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
22.154
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.561
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.096
And
the network is plugged
0.097
Then
the Additional Software upgrade service has started
0.280
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.871