And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:50.248
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.981
And
I accept adding "cowsay" to Additional Software
5.556
And
Additional Software is correctly configured for package "cowsay"
0.693
And
I shutdown Tails and wait for the computer to power off
3.052
And
I start Tails from USB drive "__internal" with network unplugged
1:2.491
And
I enable persistence
7.759
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
11.764
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.336
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.063
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.361
And
I can open the Additional Software configuration window from the notification
2.751
And
I shutdown Tails and wait for the computer to power off
18.053
And
I start Tails from USB drive "__internal" with network unplugged
1:2.815
And
I enable persistence
7.971
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
12.895
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.693
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.102
Then
the Additional Software upgrade service has started
0.163
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079