And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:3.531
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.558
And
I accept adding "cowsay" to Additional Software
5.726
And
Additional Software is correctly configured for package "cowsay"
0.830
And
I shutdown Tails and wait for the computer to power off
4.789
And
I start Tails from USB drive "__internal" with network unplugged
1:5.116
And
I enable persistence
8.368
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
12.140
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.382
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.055
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.238
And
I can open the Additional Software configuration window from the notification
2.788
And
I shutdown Tails and wait for the computer to power off
23.782
And
I start Tails from USB drive "__internal" with network unplugged
1:6.098
And
I enable persistence
8.519
And
I configure APT to prefer an old version of cowsay
0.053
And
I log in to a new session
13.478
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.310
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.090
Then
the Additional Software upgrade service has started
0.163
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065