And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:17.629
And
I configure APT to prefer an old version of cowsay
0.061
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
37.862
And
I accept adding "cowsay" to Additional Software
8.100
And
Additional Software is correctly configured for package "cowsay"
0.956
And
I shutdown Tails and wait for the computer to power off
6.599
And
I start Tails from USB drive "__internal" with network unplugged
1:33.686
And
I enable persistence
20.238
And
I configure APT to prefer an old version of cowsay
0.047
And
I disable the tails-virt-notify-user.service user unit
0.106
And
I log in to a new session
43.381
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.554
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.088
And
I prepare the Additional Software upgrade process to fail
0.194
And
the network is plugged
0.185
And
available upgrades have been checked
0.183
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.002
And
I can open the Additional Software configuration window from the notification
2.730
And
I shutdown Tails and wait for the computer to power off
2:9.342
And
I start Tails from USB drive "__internal" with network unplugged
1:25.310
And
I enable persistence
16.911
And
I configure APT to prefer an old version of cowsay
0.045
And
I log in to a new session
49.231
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
1.927
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
1.234