And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:59.195
And
I configure APT to prefer an old version of cowsay
0.076
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.913
And
I accept adding "cowsay" to Additional Software
8.945
And
Additional Software is correctly configured for package "cowsay"
1.171
And
I shutdown Tails and wait for the computer to power off
6.435
And
I start Tails from USB drive "__internal" with network unplugged
1:11.549
And
I enable persistence
17.245
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.116
And
I log in to a new session
49.865
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.759
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.085
And
available upgrades have been checked
1.796
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.131
And
I can open the Additional Software configuration window from the notification
3.903
And
I shutdown Tails and wait for the computer to power off
8.980
And
I start Tails from USB drive "__internal" with network unplugged
1:15.236
And
I enable persistence
16.579
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
44.183
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.349
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
1.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.217