And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:42.776
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.055
And
I accept adding "cowsay" to Additional Software
5.854
And
Additional Software is correctly configured for package "cowsay"
1.058
And
I shutdown Tails and wait for the computer to power off
4.344
And
I start Tails from USB drive "__internal" with network unplugged
1:8.999
And
I enable persistence
15.202
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
47.131
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.154
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.077
And
available upgrades have been checked
0.061
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.781
And
I can open the Additional Software configuration window from the notification
2.986
And
I shutdown Tails and wait for the computer to power off
15.430
And
I start Tails from USB drive "__internal" with network unplugged
1:8.217
And
I enable persistence
14.393
And
I configure APT to prefer an old version of cowsay
0.046
And
I log in to a new session
49.904
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.063
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.126
And
the network is plugged
0.548
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102