And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:37.289
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
34.343
And
I accept adding "cowsay" to Additional Software
6.197
And
Additional Software is correctly configured for package "cowsay"
0.957
And
I shutdown Tails and wait for the computer to power off
6.803
And
I start Tails from USB drive "__internal" with network unplugged
1:25.904
And
I enable persistence
18.721
And
I configure APT to prefer an old version of cowsay
0.053
And
I disable the tails-virt-notify-user.service user unit
0.156
And
I log in to a new session
57.593
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
45.805
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
I prepare the Additional Software upgrade process to fail
0.115
And
the network is plugged
0.116
And
available upgrades have been checked
0.073
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.842
And
I can open the Additional Software configuration window from the notification
6.217
And
I shutdown Tails and wait for the computer to power off
15.303
And
I start Tails from USB drive "__internal" with network unplugged
1:25.779
And
I enable persistence
15.855
And
I configure APT to prefer an old version of cowsay
0.599
And
I log in to a new session
58.178
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
36.429
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.137
Then
the Additional Software upgrade service has started
0.486
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.471