And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.015
And
I configure APT to prefer an old version of cowsay
0.059
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.432
And
I accept adding "cowsay" to Additional Software
7.908
And
Additional Software is correctly configured for package "cowsay"
0.921
And
I shutdown Tails and wait for the computer to power off
4.540
And
I start Tails from USB drive "__internal" with network unplugged
1:4.611
And
I enable persistence
13.423
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.094
And
I log in to a new session
43.329
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.050
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.105
And
available upgrades have been checked
1.108
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.204
And
I can open the Additional Software configuration window from the notification
3.171
And
I shutdown Tails and wait for the computer to power off
2:2.345
And
I start Tails from USB drive "__internal" with network unplugged
1:3.756
And
I enable persistence
12.531
And
I configure APT to prefer an old version of cowsay
0.188
And
I log in to a new session
40.410
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.083
And
the network is plugged
0.098
Then
the Additional Software upgrade service has started
0.158
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090