Project Number Date
test_Tails_ISO_devel 3880 23 Jun 2025, 12:03

Feature Report

Steps Scenarios Features
Feature Passed Failed Skipped Pending Undefined Total Passed Failed Total Duration Status
Installing Tails to a USB drive 42 6 27 0 0 75 4 6 10 22:19.428 Failed
Tags: @product
Feature Installing Tails to a USB drive
As a Tails user I want to install Tails to a suitable USB drive
Tags: @product @not_release_blocker
1:35.401
Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.010
Steps
Given I have started Tails from DVD without network and logged in 45.014
And I temporarily create a 4 GiB disk named "gptfat" 1.657
And I create a gpt partition with a vfat filesystem on disk "gptfat" 16.227
And I plug USB drive "gptfat" 5.646
When I start Tails Installer 26.855
cannot 
cannot find TailsClonerWindow.png on the screen (FindFailed)
./features/support/helpers/screen.rb:181:in `rescue in wait'
./features/support/helpers/screen.rb:165:in `wait'
./features/step_definitions/usb.rb:156:in `/^I start Tails Installer$/'
features/usb_install.feature:12:in `When I start Tails Installer'
Then I am told by Tails Installer that the destination device "is too small" 0.000
After features/support/hooks.rb:330 6.010 
SCENARIO FAILED: 'Try installing Tails to a too small USB drive with GPT and a FAT partition' (at time 01:17:09)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:17:09_Try_installing_Tails_to_a_too_small_USB_drive_with_GPT_and_a_FAT_partition.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:17:09_Try_installing_Tails_to_a_too_small_USB_drive_with_GPT_and_a_FAT_partition.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:17:09_Try_installing_Tails_to_a_too_small_USB_drive_with_GPT_and_a_FAT_partition.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:17:09_Try_installing_Tails_to_a_too_small_USB_drive_with_GPT_and_a_FAT_partition.journal
After features/support/hooks.rb:100 0.003
Tags: @product
53.294
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.006
Given I have started Tails from DVD without network and logged in 21.754
And I temporarily create a 7200 MiB disk named "temp" 0.108
And I start Tails Installer 19.193
But a suitable USB device is not found 0.020
When I plug USB drive "temp" 6.981
Then the "temp" USB drive is selected 3.328
When I unplug USB drive "temp" 1.875
Then a suitable USB device is not found 0.032
After features/support/hooks.rb:330 1.189
After features/support/hooks.rb:100 0.000
Tags: @product
1:58.987
Scenario Installing Tails with Tails Installer to a used USB drive
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.004
Steps
Given I have started Tails from DVD without network and logged in 1:11.340
And I temporarily create a 7200 MiB disk named "install" 2.293
And I create a gpt partition with a vfat filesystem on disk "install" 12.422
And I plug USB drive "install" 11.184
And I install Tails to USB drive "install" by cloning 21.745
cannot 
cannot find TailsClonerWindow.png on the screen (FindFailed)
./features/support/helpers/screen.rb:181:in `rescue in wait'
./features/support/helpers/screen.rb:165:in `wait'
./features/step_definitions/usb.rb:156:in `/^I start Tails Installer$/'
./features/step_definitions/usb.rb:187:in `/^I (install|reinstall|upgrade) Tails( with Persistent Storage)? (?:to|on) USB drive "([^"]+)" by cloning$/'
features/usb_install.feature:30:in `And I install Tails to USB drive "install" by cloning'
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
But there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:330 5.848 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a used USB drive' (at time 01:20:09)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:20:09_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:20:09_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:20:09_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:20:09_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive.journal
After features/support/hooks.rb:100 0.003
Tags: @product
1:14.214
Scenario Installing Tails with Tails Installer to a pristine USB drive
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.012
Steps
Given I have started Tails from DVD without network and logged in 1:14.214
Failed 
Failed to restore snapshot (RuntimeError)
./features/step_definitions/common_steps.rb:89:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ from\ DVD\ without\ network\ and\ logged\ in$/'
features/usb_install.feature:36:in `Given I have started Tails from DVD without network and logged in'
And I temporarily create a 7200 MiB disk named "install" 0.000
And I plug USB drive "install" 0.000
And I install Tails to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
But there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:330 5.621 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a pristine USB drive' (at time 01:21:29)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:21:29_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:21:29_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:21:29_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:21:29_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive.journal
After features/support/hooks.rb:100 0.000
Tags: @product
5:35.146
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 22.797
And I create a file in the Persistent directory 1.167
And I temporarily create a 7200 MiB disk named "install" 0.582
And I create a gpt partition with a vfat filesystem on disk "install" 15.216
And I plug USB drive "install" 5.644
And I install Tails with Persistent Storage to USB drive "install" by cloning 3:32.124
Then the running Tails is installed on USB drive "install" 45.939
And there is a random seed on USB drive "install" 16.597
And there is a persistence partition on USB drive "install" 0.694
And the USB drive "install" contains the same files as my persistent storage 14.381
After features/support/hooks.rb:330 2.979
After features/support/hooks.rb:100 0.482
Tags: @product
4:22.399
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.010
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 21.849
And I temporarily create a 7200 MiB disk named "install" 0.143
And I plug USB drive "install" 4.391
And I install Tails to USB drive "install" by cloning 2:52.736
Then the running Tails is installed on USB drive "install" 57.090
And there is a random seed on USB drive "install" 6.085
And there is no persistence partition on USB drive "install" 0.102
After features/support/hooks.rb:330 5.925
After features/support/hooks.rb:100 0.948
Tags: @product
1:45.709
Scenario Re-installing Tails over an existing USB installation with a persistent partition
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.013
Steps
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 17.623
And I have started Tails from DVD without network and logged in 1:28.085
Failed 
Failed to restore snapshot (RuntimeError)
./features/step_definitions/common_steps.rb:89:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ from\ DVD\ without\ network\ and\ logged\ in$/'
features/usb_install.feature:71:in `And I have started Tails from DVD without network and logged in'
And I clone USB drive "__internal" to a temporary USB drive "install" 0.000
And I plug USB drive "install" 0.000
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:330 5.416 
SCENARIO FAILED: 'Re-installing Tails over an existing USB installation with a persistent partition' (at time 01:33:29)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:33:29_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:33:29_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:33:29_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:33:29_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.journal
After features/support/hooks.rb:100 0.000
Tags: @product @uefi
3:36.965
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 21.507
And I power off the computer 0.343
And the computer is set to boot in UEFI mode 0.049
When I start Tails from USB drive "__internal" with network unplugged and I login 3:2.279
Then Tails is running from USB drive "__internal" 5.759
And the boot device has safe access rights 6.953
And Tails has started in UEFI mode 0.070
After features/support/hooks.rb:330 0.642
After features/support/hooks.rb:100 0.020
Tags: @product
1:17.032
Scenario Installing Tails with GNOME Disks from a USB image
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Steps
Given I have started Tails from DVD without network and logged in 1:17.032
Failed 
Failed to restore snapshot (RuntimeError)
./features/step_definitions/common_steps.rb:89:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ from\ DVD\ without\ network\ and\ logged\ in$/'
features/usb_install.feature:91:in `Given I have started Tails from DVD without network and logged in'
And I plug and mount a USB drive containing a Tails USB image 0.000
And I create a 7200 MiB disk named "usbimage" 0.000
And I plug USB drive "usbimage" 0.000
And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 0.000
After features/support/hooks.rb:330 6.009 
SCENARIO FAILED: 'Installing Tails with GNOME Disks from a USB image' (at time 01:38:29)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:38:29_Installing_Tails_with_GNOME_Disks_from_a_USB_image.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:38:29_Installing_Tails_with_GNOME_Disks_from_a_USB_image.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:38:29_Installing_Tails_with_GNOME_Disks_from_a_USB_image.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:38:29_Installing_Tails_with_GNOME_Disks_from_a_USB_image.journal
After features/support/hooks.rb:100 0.000
Tags: @product
0.277
Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.004
Steps
Given a computer 0.244
And I start Tails from USB drive "usbimage" with network unplugged and I login 0.033
Call 
Call to virStorageVolLookupByName failed: Storage volume not found: no storage vol with matching name 'usbimage' (Libvirt::RetrieveError)
./features/support/helpers/storage_helper.rb:151:in `lookup_volume_by_name'
./features/support/helpers/storage_helper.rb:151:in `disk_path'
./features/support/helpers/vm_helper.rb:337:in `plug_drive'
./features/support/helpers/vm_helper.rb:416:in `set_disk_boot'
./features/step_definitions/common_steps.rb:144:in `/^the computer is set to boot from (.+?) drive "(.+?)"$/'
./features/step_definitions/common_steps.rb:282:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_install.feature:100:in `And I start Tails from USB drive "usbimage" with network unplugged and I login'
Then Tails is running from USB drive "usbimage" 0.000
And the label of the system partition on "usbimage" is "Tails" 0.000
And the system partition on "usbimage" is an EFI system partition 0.000
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.000
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.000
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.000
And the system partition on "usbimage" has the expected flags 0.000
Hooks
After features/support/hooks.rb:330 6.345
Error message 
<false> is not true. (Test::Unit::AssertionFailedError)
./features/support/hooks.rb:455:in `block (2 levels) in <top (required)>'
./features/support/hooks.rb:450:in `each'
./features/support/hooks.rb:450:in `After'
Output 1 
SCENARIO FAILED: 'The system partition is updated when booting from a USB drive where a Tails USB image was copied' (at time 01:38:37)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:38:37_The_system_partition_is_updated_when_booting_from_a_USB_drive_where_a_Tails_USB_image_was_copied.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3880/artifact/build-artifacts/01:38:37_The_system_partition_is_updated_when_booting_from_a_USB_drive_where_a_Tails_USB_image_was_copied.mkv
After features/support/hooks.rb:100 0.000