And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.862
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.718
And
I accept adding "cowsay" to Additional Software
6.681
And
Additional Software is correctly configured for package "cowsay"
0.847
And
I shutdown Tails and wait for the computer to power off
4.396
And
I start Tails from USB drive "__internal" with network unplugged
1:1.446
And
I enable persistence
12.666
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
39.288
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.439
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.098
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.071
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.776
And
I can open the Additional Software configuration window from the notification
3.259
And
I shutdown Tails and wait for the computer to power off
14.873
And
I start Tails from USB drive "__internal" with network unplugged
1:1.450
And
I enable persistence
11.105
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
39.589
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.197
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.107