And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:54.517
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.580
And
I accept adding "cowsay" to Additional Software
3.223
And
Additional Software is correctly configured for package "cowsay"
0.925
And
I shutdown Tails and wait for the computer to power off
6.463
And
I start Tails from USB drive "__internal" with network unplugged
1:2.531
And
I enable persistence
14.014
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.098
And
I log in to a new session
42.864
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.421
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.073
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.475
And
I can open the Additional Software configuration window from the notification
3.096
And
I shutdown Tails and wait for the computer to power off
13.174
And
I start Tails from USB drive "__internal" with network unplugged
1:8.101
And
I enable persistence
12.158
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
40.424
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.517
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.122
Then
the Additional Software upgrade service has started
0.172
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091