And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.429
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
32.912
And
I accept adding "cowsay" to Additional Software
4.557
And
Additional Software is correctly configured for package "cowsay"
1.108
And
I shutdown Tails and wait for the computer to power off
4.651
And
I start Tails from USB drive "__internal" with network unplugged
1:6.084
And
I enable persistence
11.607
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.110
And
I log in to a new session
42.571
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.400
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.084
And
available upgrades have been checked
1.155
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.175
And
I can open the Additional Software configuration window from the notification
2.651
And
I shutdown Tails and wait for the computer to power off
19.375
And
I start Tails from USB drive "__internal" with network unplugged
1:4.773
And
I enable persistence
11.843
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
44.089
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.612
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.074
Then
the Additional Software upgrade service has started
0.215
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.147