And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.879
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.810
And
I accept adding "cowsay" to Additional Software
5.604
And
Additional Software is correctly configured for package "cowsay"
0.917
And
I shutdown Tails and wait for the computer to power off
6.417
And
I start Tails from USB drive "__internal" with network unplugged
1:0.926
And
I enable persistence
11.168
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
43.906
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.152
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.079
And
available upgrades have been checked
1.152
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.667
And
I can open the Additional Software configuration window from the notification
2.664
And
I shutdown Tails and wait for the computer to power off
2:2.131
And
I start Tails from USB drive "__internal" with network unplugged
1:5.337
And
I enable persistence
15.103
And
I configure APT to prefer an old version of cowsay
0.047
And
I log in to a new session
45.805
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.576
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.759
Then
the Additional Software upgrade service has started
0.188
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079