And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:39.002
And
I configure APT to prefer an old version of cowsay
0.047
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.535
And
I accept adding "cowsay" to Additional Software
7.556
And
Additional Software is correctly configured for package "cowsay"
1.002
And
I shutdown Tails and wait for the computer to power off
6.443
And
I start Tails from USB drive "__internal" with network unplugged
1:8.532
And
I enable persistence
12.140
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.113
And
I log in to a new session
44.638
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.537
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.080
And
available upgrades have been checked
1.131
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.716
And
I can open the Additional Software configuration window from the notification
2.860
And
I shutdown Tails and wait for the computer to power off
11.069
And
I start Tails from USB drive "__internal" with network unplugged
1:13.365
And
I enable persistence
18.472
And
I configure APT to prefer an old version of cowsay
0.043
And
I log in to a new session
55.750
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.980
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.083
And
the network is plugged
0.091
Then
the Additional Software upgrade service has started
0.232
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.124