And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:31.908
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.227
And
I accept adding "cowsay" to Additional Software
4.786
And
Additional Software is correctly configured for package "cowsay"
0.903
And
I shutdown Tails and wait for the computer to power off
6.607
And
I start Tails from USB drive "__internal" with network unplugged
1:5.786
And
I enable persistence
24.216
And
I configure APT to prefer an old version of cowsay
0.067
And
I disable the tails-virt-notify-user.service user unit
0.106
And
I log in to a new session
41.617
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.512
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.246
And
available upgrades have been checked
2.478
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.121
And
I can open the Additional Software configuration window from the notification
3.557
And
I shutdown Tails and wait for the computer to power off
11.343
And
I start Tails from USB drive "__internal" with network unplugged
1:7.518
And
I enable persistence
13.112
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
38.511
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.443
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.074
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085