And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.902
And
I configure APT to prefer an old version of cowsay
0.088
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.533
And
I accept adding "cowsay" to Additional Software
5.505
And
Additional Software is correctly configured for package "cowsay"
0.971
And
I shutdown Tails and wait for the computer to power off
7.000
And
I start Tails from USB drive "__internal" with network unplugged
1:3.123
And
I enable persistence
12.267
And
I configure APT to prefer an old version of cowsay
0.057
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
39.661
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.290
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.148
And
available upgrades have been checked
0.118
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.535
And
I can open the Additional Software configuration window from the notification
2.964
And
I shutdown Tails and wait for the computer to power off
2:1.946
And
I start Tails from USB drive "__internal" with network unplugged
1:2.718
And
I enable persistence
12.461
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
40.021
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.448
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.089
Then
the Additional Software upgrade service has started
0.195
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101