And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:38.613
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.230
And
I accept adding "cowsay" to Additional Software
5.769
And
Additional Software is correctly configured for package "cowsay"
0.933
And
I shutdown Tails and wait for the computer to power off
4.916
And
I start Tails from USB drive "__internal" with network unplugged
1:3.838
And
I enable persistence
16.147
And
I configure APT to prefer an old version of cowsay
0.080
And
I disable the tails-virt-notify-user.service user unit
0.203
And
I log in to a new session
49.706
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.712
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.097
And
I prepare the Additional Software upgrade process to fail
0.127
And
the network is plugged
0.076
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.584
And
I can open the Additional Software configuration window from the notification
3.180
And
I shutdown Tails and wait for the computer to power off
2:8.094
And
I start Tails from USB drive "__internal" with network unplugged
1:9.024
And
I enable persistence
13.403
And
I configure APT to prefer an old version of cowsay
0.043
And
I log in to a new session
44.292
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.811
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.177
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101