And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.791
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.366
And
I accept adding "cowsay" to Additional Software
7.586
And
Additional Software is correctly configured for package "cowsay"
0.983
And
I shutdown Tails and wait for the computer to power off
6.696
And
I start Tails from USB drive "__internal" with network unplugged
1:2.747
And
I enable persistence
11.884
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.101
And
I log in to a new session
45.965
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.501
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.095
And
the network is plugged
0.074
And
available upgrades have been checked
1.129
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.798
And
I can open the Additional Software configuration window from the notification
2.952
And
I shutdown Tails and wait for the computer to power off
2:3.034
And
I start Tails from USB drive "__internal" with network unplugged
1:2.392
And
I enable persistence
11.912
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
45.086
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.477
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.088
Then
the Additional Software upgrade service has started
0.201
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082