And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.925
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.841
And
I accept adding "cowsay" to Additional Software
4.288
And
Additional Software is correctly configured for package "cowsay"
0.910
And
I shutdown Tails and wait for the computer to power off
6.507
And
I start Tails from USB drive "__internal" with network unplugged
1:8.092
And
I enable persistence
13.867
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.115
And
I log in to a new session
41.251
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.864
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.077
And
available upgrades have been checked
0.065
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.142
And
I can open the Additional Software configuration window from the notification
3.799
And
I shutdown Tails and wait for the computer to power off
19.172
And
I start Tails from USB drive "__internal" with network unplugged
1:1.148
And
I enable persistence
10.268
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
40.498
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.092
Then
the Additional Software upgrade service has started
0.182
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082