And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:31.685
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.518
And
I accept adding "cowsay" to Additional Software
6.914
And
Additional Software is correctly configured for package "cowsay"
0.882
And
I shutdown Tails and wait for the computer to power off
6.520
And
I start Tails from USB drive "__internal" with network unplugged
1:0.663
And
I enable persistence
12.182
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.088
And
I log in to a new session
39.933
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.070
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.069
And
available upgrades have been checked
0.206
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.105
And
I can open the Additional Software configuration window from the notification
3.577
And
I shutdown Tails and wait for the computer to power off
2:8.227
And
I start Tails from USB drive "__internal" with network unplugged
1:0.134
And
I enable persistence
11.333
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
40.253
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.068
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.097
Then
the Additional Software upgrade service has started
0.186
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091