And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.067
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.858
And
I accept adding "cowsay" to Additional Software
5.370
And
Additional Software is correctly configured for package "cowsay"
0.807
And
I shutdown Tails and wait for the computer to power off
6.651
And
I start Tails from USB drive "__internal" with network unplugged
59.415
And
I enable persistence
11.838
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
39.294
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.959
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.072
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.625
And
I can open the Additional Software configuration window from the notification
3.122
And
I shutdown Tails and wait for the computer to power off
2:2.516
And
I start Tails from USB drive "__internal" with network unplugged
59.270
And
I enable persistence
13.433
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
41.869
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.389
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091