And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:31.860
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.918
And
I accept adding "cowsay" to Additional Software
6.395
And
Additional Software is correctly configured for package "cowsay"
1.061
And
I shutdown Tails and wait for the computer to power off
6.474
And
I start Tails from USB drive "__internal" with network unplugged
1:1.361
And
I enable persistence
12.418
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
31.993
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.037
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.156
And
available upgrades have been checked
0.088
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.898
And
I can open the Additional Software configuration window from the notification
3.063
And
I shutdown Tails and wait for the computer to power off
2:6.792
And
I start Tails from USB drive "__internal" with network unplugged
1:0.387
And
I enable persistence
12.986
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
40.304
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.705
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.067
Then
the Additional Software upgrade service has started
0.191
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087