And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.465
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
28.886
And
I accept adding "cowsay" to Additional Software
2.946
And
Additional Software is correctly configured for package "cowsay"
0.884
And
I shutdown Tails and wait for the computer to power off
6.506
And
I start Tails from USB drive "__internal" with network unplugged
1:8.446
And
I enable persistence
10.664
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
38.199
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.459
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.082
And
available upgrades have been checked
1.123
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.391
And
I can open the Additional Software configuration window from the notification
2.863
And
I shutdown Tails and wait for the computer to power off
2:2.441
And
I start Tails from USB drive "__internal" with network unplugged
1:0.179
And
I enable persistence
13.282
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
43.248
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.075
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.155
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.105