And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:35.570
And
I configure APT to prefer an old version of cowsay
0.040
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.715
And
I accept adding "cowsay" to Additional Software
4.331
And
Additional Software is correctly configured for package "cowsay"
0.917
And
I shutdown Tails and wait for the computer to power off
6.528
And
I start Tails from USB drive "__internal" with network unplugged
1:1.849
And
I enable persistence
13.174
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
45.106
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.926
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.092
And
available upgrades have been checked
1.149
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.369
And
I can open the Additional Software configuration window from the notification
2.614
And
I shutdown Tails and wait for the computer to power off
10.933
And
I start Tails from USB drive "__internal" with network unplugged
1:1.840
And
I enable persistence
14.580
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
41.251
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.227
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.112