And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:31.663
And
I configure APT to prefer an old version of cowsay
0.038
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.538
And
I accept adding "cowsay" to Additional Software
4.577
And
Additional Software is correctly configured for package "cowsay"
1.023
And
I shutdown Tails and wait for the computer to power off
6.305
And
I start Tails from USB drive "__internal" with network unplugged
1:0.594
And
I enable persistence
16.606
And
I configure APT to prefer an old version of cowsay
0.130
And
I disable the tails-virt-notify-user.service user unit
0.175
And
I log in to a new session
39.530
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.086
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.078
And
available upgrades have been checked
1.200
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.208
And
I can open the Additional Software configuration window from the notification
2.416
And
I shutdown Tails and wait for the computer to power off
17.518
And
I start Tails from USB drive "__internal" with network unplugged
1:1.008
And
I enable persistence
15.341
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
37.414
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.875
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088