And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:33.538
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.258
And
I accept adding "cowsay" to Additional Software
6.562
And
Additional Software is correctly configured for package "cowsay"
1.123
And
I shutdown Tails and wait for the computer to power off
6.559
And
I start Tails from USB drive "__internal" with network unplugged
1:2.202
And
I enable persistence
12.511
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.102
And
I log in to a new session
41.845
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.747
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.099
And
the network is plugged
0.140
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.637
And
I can open the Additional Software configuration window from the notification
3.876
And
I shutdown Tails and wait for the computer to power off
19.311
And
I start Tails from USB drive "__internal" with network unplugged
1:7.839
And
I enable persistence
13.442
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
49.307
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.054
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.173
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073