And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.977
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.764
And
I accept adding "cowsay" to Additional Software
6.844
And
Additional Software is correctly configured for package "cowsay"
0.942
And
I shutdown Tails and wait for the computer to power off
6.414
And
I start Tails from USB drive "__internal" with network unplugged
1:2.214
And
I enable persistence
13.218
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
41.396
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.453
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.116
And
available upgrades have been checked
1.114
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.574
And
I can open the Additional Software configuration window from the notification
2.757
And
I shutdown Tails and wait for the computer to power off
2:1.966
And
I start Tails from USB drive "__internal" with network unplugged
1:0.705
And
I enable persistence
13.886
And
I configure APT to prefer an old version of cowsay
0.062
And
I log in to a new session
37.685
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.021
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.176
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097