And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.137
And
I configure APT to prefer an old version of cowsay
0.074
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.131
And
I accept adding "cowsay" to Additional Software
5.491
And
Additional Software is correctly configured for package "cowsay"
0.922
And
I shutdown Tails and wait for the computer to power off
4.281
And
I start Tails from USB drive "__internal" with network unplugged
1:2.172
And
I enable persistence
11.776
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
40.941
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.562
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.778
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.092
And
I can open the Additional Software configuration window from the notification
4.297
And
I shutdown Tails and wait for the computer to power off
19.014
And
I start Tails from USB drive "__internal" with network unplugged
1:2.014
And
I enable persistence
10.966
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
41.247
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.592
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
the network is plugged
0.097
Then
the Additional Software upgrade service has started
0.196
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.113