And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.058
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.194
And
I accept adding "cowsay" to Additional Software
4.411
And
Additional Software is correctly configured for package "cowsay"
0.911
And
I shutdown Tails and wait for the computer to power off
6.315
And
I start Tails from USB drive "__internal" with network unplugged
59.113
And
I enable persistence
13.726
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.101
And
I log in to a new session
44.934
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.436
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.060
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.898
And
I can open the Additional Software configuration window from the notification
3.118
And
I shutdown Tails and wait for the computer to power off
13.128
And
I start Tails from USB drive "__internal" with network unplugged
1:0.090
And
I enable persistence
11.162
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
41.044
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.930
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
the network is plugged
0.096
Then
the Additional Software upgrade service has started
0.157
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.103