And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.836
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.129
And
I accept adding "cowsay" to Additional Software
6.444
And
Additional Software is correctly configured for package "cowsay"
1.159
And
I shutdown Tails and wait for the computer to power off
6.759
And
I start Tails from USB drive "__internal" with network unplugged
1:3.406
And
I enable persistence
13.255
And
I configure APT to prefer an old version of cowsay
0.043
And
I disable the tails-virt-notify-user.service user unit
0.088
And
I log in to a new session
40.754
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.727
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.083
And
the network is plugged
0.085
And
available upgrades have been checked
1.153
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.728
And
I can open the Additional Software configuration window from the notification
2.940
And
I shutdown Tails and wait for the computer to power off
13.641
And
I start Tails from USB drive "__internal" with network unplugged
1:4.335
And
I enable persistence
12.843
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
40.507
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.800
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.091
Then
the Additional Software upgrade service has started
0.195
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.119