And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:55.246
And
I configure APT to prefer an old version of cowsay
0.044
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
35.162
And
I accept adding "cowsay" to Additional Software
8.814
And
Additional Software is correctly configured for package "cowsay"
1.361
And
I shutdown Tails and wait for the computer to power off
6.647
And
I start Tails from USB drive "__internal" with network unplugged
1:19.939
And
I enable persistence
13.145
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
46.240
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.472
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.106
And
the network is plugged
0.607
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.800
And
I can open the Additional Software configuration window from the notification
3.642
And
I shutdown Tails and wait for the computer to power off
14.041
And
I start Tails from USB drive "__internal" with network unplugged
1:8.073
And
I enable persistence
14.786
And
I configure APT to prefer an old version of cowsay
0.056
And
I log in to a new session
46.168
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.108
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.093