And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.724
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.234
And
I accept adding "cowsay" to Additional Software
7.335
And
Additional Software is correctly configured for package "cowsay"
1.150
And
I shutdown Tails and wait for the computer to power off
6.076
And
I start Tails from USB drive "__internal" with network unplugged
1:8.403
And
I enable persistence
10.530
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
40.879
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.279
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.063
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.954
And
I can open the Additional Software configuration window from the notification
2.461
And
I shutdown Tails and wait for the computer to power off
14.573
And
I start Tails from USB drive "__internal" with network unplugged
1:1.484
And
I enable persistence
12.598
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
39.629
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.068
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.104
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.184
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098