And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.293
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.330
And
I accept adding "cowsay" to Additional Software
5.263
And
Additional Software is correctly configured for package "cowsay"
0.939
And
I shutdown Tails and wait for the computer to power off
4.420
And
I start Tails from USB drive "__internal" with network unplugged
59.059
And
I enable persistence
11.337
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
38.635
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.364
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.070
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.011
And
I can open the Additional Software configuration window from the notification
2.769
And
I shutdown Tails and wait for the computer to power off
18.173
And
I start Tails from USB drive "__internal" with network unplugged
59.243
And
I enable persistence
11.428
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
37.669
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.270
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.152
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087